18www.se.comDescriptionConnectorsConnectors (general)L1 + NL2 + NL3 + NKBC10DCS101KBC10DCS201KBC10DCS301For instantaneous connection of luminaires to busbar trunking: bthey can be handled while energised and under live conditions bthe contacts for live conductors are of the clamp type bPE connection occurs before that of the phases and neutral bphase-selection system (clip-in contact studs) for balancing of 3-phase distribution systems bselection is visible via a transparent window ba coloured lock holds them in the connector outlet ball the insulating and plastic materials have a high fire-retardant capacity: vincandescent-wire test in compliance with IEC 60695-2: - 960°C for components in contact with live parts, - 650°C for other components.All the insulators and plastic components are halogen free.Connectors 10 A direct pre-wired - 0.8 mPre-wired with SO5Z1Z1-F 3 x 1.5 mm2 cable, 0.80 m long, pre-stripped on luminaire end: b10 A rating bfixed L + N + PE polarity bthe various models make it possible to balance 3-phase distribution systems.The colour of the lock and the casing enable remote identification of the polarity.1 Live-conductor contacts.2 Protective-conductor contact.3 Lock.Connectors 10 A direct with phase selectionKBC10DCBpp bThe two contact studs are movable and can be used to set up both L + N + PE and 2L + PE distribution. bSupplied complete with a cable gland.KBC10DCC211Pre-wiredType DCC bPre-wired with SO5Z1Z1-F 3 x 1.5 mm2 cable, 1 m long, pre-stripped on luminaire end. bIf prefabricated leads are used, the line must have 16 A protection (see possibilities of dispensing with protection in the simplified design guide for lighting distribution, in the section on protection against overloads).To be wiredType DCB bTo be wired for connection of luminaires using a cable of specific type, size or length. bFast connection for 3 x 0.75 to 1.5 mm2 cable. If prefabricated leads are used, the line must have 16 A protection (see possibilities of dispensing with protection in the simplified design guide for lighting distribution, in the section on protection against overloads).Identification of the selected phase
Previous page: Prefabricerad kanalskena för belysning och [17 / 68]
Next page: Prefabricerad kanalskena för belysning och [19 / 68]
