17www.se.comDescriptionFixing bracketsFor attachment of the busbar trunking to the structure of the building, either directly or via a threaded rod, chain or steel cable (the latter two with a pigtail hook or a closed ring). bDesigned to relieve the installer of the weight of the busbar trunking once placed in a bracket. bAutomatic locking of moving part on closing (unlocking requires a tool). bThe maximum recommended fixing distance is: 3 metres.1 Universal fixing bracket KBA40ZFU or KBB40ZFU For suspension on a threaded rod, diameter 6 mm. For horizontal mounting on a beam, pendant, wall, etc.2 Cable suspension system KBA40ZFSU or KBB40ZFSU Cuts mounting time of the fixing system to one-third of that required for threaded rods. Enables height adjustment of the trunking.3 Adjustable, threaded-rod suspension system KBB40ZFPU For suspension on a threaded rod, diameter 6 mm. A spring system locks the threaded rod in position for fast adjustment of the trunking.4 Pigtail hook KBB40ZFC For suspension by a chain.5 Closed ring KBB40ZFC6 Mounted on the luminaire for suspension.6 Raiser KBB40ZFMP For mounting on wall or false floor.7 Open hook KBB40ZFC5 To suspend the luminaire.213457518756161LuminairesAttached to the luminaires before mounting, these fixings ensure fast and direct fixing to Canalis KB. bSame catalogue numbers as the busbar fixings. bAutomatic locking of moving part on closing. bUse with an open hook and/or closed ring enables suspension.8 Double universal fixing bracket KBA40ZFU2W or KBB40ZFU2W for heavy luminaires.Cable supportFor running adjacent circuits such as emergency lighting, low-current circuits, etc.1 Cable brackets KBB40ZFGU Clips to trunking for fast mounting. It is possible to run three cables (diameter 5 to 16 mm) and two IRL tubes.2 Cable duct KFB25CD253 The cable duct fits on support KBB40ZFG1, which in turn fits onto a threaded rod suspension system KBA40ZFPU. An intermediate support is placed between the duct and the trunking if the distance between the suspension points exceeds 2 metres. Each duct is equipped with a connection device.OptionsEmpty length (no electric circuit)Used to adjust line length to building dimensions (e.g. to reach a fixing point).Two metres long, can be cut on site.KBA40EDA20W or KBB40EDA20W.B
Previous page: Prefabricerad kanalskena för belysning och [16 / 68]
Next page: Prefabricerad kanalskena för belysning och [18 / 68]
