19www.se.comConnectors 16 A with phase selection not wiredKBC16DCBppKBC16DCFppKBC16DCPpp bPhase selection: L+N or 2L (mobile studs) bTerminal connections for 0.75 to 1.5 mm2 cable. bSupplied with a cable bushing. bInstallation is facilitated by the side guides. bExist with 3L+N or with fixed polarity as well.Without protectionType DCBFor direct connection of luminaires using a specific cable.Can be equipped with the accessory to connect the remote-control circuit to theluminaires.For protection with fuses (not provided)Type DCFFor cylindrical fuse NF 8.5 x 31.5 (not supplied), 16 A gG maximum, breakingcapacity 20 kA.Type DCPWith cylindrical fuse NF 8.5 x 31.5 (supplied), 16 A gG maximum, breakingcapacity 20 kA.Supplied with power socket NF or VDE standard - 2P+T 10/16 A, 250 V.Interlocking deviceRed interlocking deviceFor all 10 A and 16 A connectors.A set of three interlocking devices in different colours can be used to mechanicallylock out connector when two or three different distribution networks are present(load, voltage, frequency, etc.). KBC16ZL10, KBC16ZL20 or KBC16ZL30. bAn interlocking device is made up of a handle and an interlocking device on each end. It can be used for an outlet and the corresponding connector. bInterlocking devices are supplied with labels that can be placed on the connector and the trunking for identification.AccessoriesKBC16ZC1Rear support bracket KBC16ZC1Additional fixing of KBC16 connector using the rear support bracket may be necessary, notably if there is a risk of accidental pulling on the cable or if the cable is very heavy (great length).KBC16ZB1Outlet blanking plate KBC16ZB1Spare part intended to restore IP55 on an outlet following removal of the connector (if original blanking plate is lost).Description ConnectorsB
Previous page: Prefabricerad kanalskena för belysning och [18 / 68]
Next page: Prefabricerad kanalskena för belysning och [20 / 68]
