Representative offering only, visit www.panduit.com for complete listing of products.2Panduit is a global leader in reliable and innovative solutions for identification and safety. Products are engineered for a wide variety of industries and applications – including electrical, electronics, industrial, and network. Panduit offers a complete,leading-edge line of labeling software, high-performance label materials (all RoHS compliant), and printers that provide enhanced productivity, dependability, and value to all infrastructure labeling requirements. 2
Contact Technical Support at 866.871.4571.3Cable/Wire LabelsTurn-Tell® Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Self-Laminating Labels ............................5 – 7 LabelCore™ Fiber Optic Cable Identification System .......7 – 8Flag Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Non-Laminated Vinyl Cloth Labels. . . . . . . . . . . . . . . . . . . . 9Non-Laminated Nylon Cloth Labels ...................9 Marker PlatesHigh-Temperature Flame-Retardant Marker Plates .......10 Halogen-Free Flame-Retardant Marker Plates ...........10Standard Marker Plates ............................11Heat Shrink LabelsMilitary Grade – Single-Sided Labels. . . . . . . . . . . . . . . . . .12Military Grade – Two-Sided Labels ...................13Halogen-Free – Two-Sided Labels ....................14Fluid-Resistant – Two-Sided Labels ...................15Component Labels/Continuous TapesTerminal Block Markers. . . . . . . . . . . . . . . . . . . . . . . . . . . .16Raised Panel Labels ...............................17 – 20Polyester Component Labels. . . . . . . . . . . . . . . . . . . . . . . .21Super-Tack Polyester Component Labels ..............22Tedlar® Component Labels. . . . . . . . . . . . . . . . . . . . . . . . . .23Tamper-Evident Polyester Component Labels ...........23Non-Adhesive Polyester Component Labels ............24Vinyl Cloth Component Labels .......................24Polyimide Component Labels. . . . . . . . . . . . . . . . . . . . . . . .25Paper Component Labels ...........................26Continuous Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 – 28Safety and Solar LabelsSuper-Tack Polyester Arc Flash Labels ................29Raised Panel Arc Flash Labels .......................29Super-Tack Arc Flash Continuous Tapes ...............30Super-Tack Polyester Facility Identification Labels .......30Polyester Photoluminescent Tapes ...................31Raised Panel Solar Labels ..........................31Super-Tack Polyester Solar Labels ...................32Over-Laminate Labels .............................32Reflective Continuous Tapes for Solar Applications .......32Tedlar is a registered trademark of E.I. du Pont de Nemours and Company.Software/Printers/AccessoriesSoftware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33TDP43ME Printers, Accessories and Ribbons ...........34TDP43HE & TDP46HE Printers, Accessories & Ribbons ...353Contact Technical Support at 866.871.4571.
Representative offering only, visit www.panduit.com for complete listing of products.4Turn-Tell® Labels• Allows labels to rotate for visibility from any angle, and allows repositioning on the wire/cable to align legends for improved aesthetics• Ideal for use in high-density or space-constrained cable applications• Use thermal transfer hybrid ribbons shown on pages 34 and 35• Temperature range: -40°F to 150°F (-40°C to 66°C) Part NumberPrint-On Area ColorWidthLengthPrint-On AreaHeightMin. CableO.D.Max. CableO.D.Wire RangeLabelsPerRowStd.Pkg.Qty.In.mmIn.mmIn.mmIn.mmIn.mmR050X075V1TWhite 0.5012.70.7519.10.256.40.123.10.164.1Cat. 6 28 AWG/18 – 14 AWG85000R050X125V1T1.2531.80.389.70.164.10.225.6Cat. 3 UTP/12 – 10 AWGR050X150V1T1.5038.10.5012.70.225.60.287.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/10 – 6 AWGR100X075V1T1.0025.40.7519.10.256.40.123.10.164.1Cat. 6 28 AWG/18 – 14 AWG42500R100X125V1T1.2531.80.389.70.164.10.225.6Cat. 3 UTP/12 – 10 AWGR100X150V1T1.5038.10.5012.70.225.60.287.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/R100X150V2TTIA BlueR100X150V3TTIA GreenR100X150V4TTIA GrayR100X150V7TTIA RedR100X150V8TTIA YellowR100X225V1TWhite2.2557.20.7519.10.287.10.399.9Cat. 6 FTP/Cat. 6 UTP/Cat. 6A FTP/8-4 AWGR100X225V2TTIA Blue R100X225V3TTIA GreenR100X225V4TTIA GrayR100X225V7TTIA RedR100X225V8TTIA YellowR100X400V1TWhite4.00101.61.0025.40.399.90.9524.12 – 1 AWG1000R150X150V1T1.5038.11.5038.10.5012.70.225.60.287.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/10 – 6 AWG2R200X150V1T2.0050.8R200X225V1T2.2557.20.7519.10.287.10.399.9Cat. 6 FTP/Cat. 6A UTP/Cat. 6A FTP/8 – 4 AWG4R200X400V1T4.00101.61.0025.40.399.90.9524.12 – 1 AWG2Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Contact Technical Support at 866.871.4571.5Vinyl Self-Laminating Labels• Includes a colored print-on area and clear overlaminate to protect the legend for clear and durable identification• Sized specifically for wire and cable applications• Thin and conformable; preferred material for most general wire/cable labeling• Use thermal transfer hybrid ribbons shown on pages 34 and 35• Temperature range: -40°F to 150°F (-40°C to 66°C)• UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15-01, File # MH14979Part NumberPrint-On Area ColorWidthLengthPrint-On AreaHeightMin. CableO.D.Max. CableO.D.Wire RangeLabelsPerRowStd.Pkg.Qty.In.mmIn.mmIn.mmIn.mmIn.mmS050X075VA1YWhite0.5012.70.7519.10.256.40.082.00.164.1Cat. 6 28 AWG/18 – 14 AWG85000S050X075VATY*2500S050X125VA1Y1.2531.80.389.70.123.10.287.0Cat. 3 UTP/12 - 10 AWG5000S050X125VATY*S050X150VA1Y1.5038.10.5012.70.164.10.328.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/10 – 6 AWGS050X150VATY*S050X250VATY*2.5063.51.0025.40.328.10.4812.16 – 2 AWGS075X075VATY*0.7519.10.7519.10.256.40.082.00.164.1Cat. 6 28 AWG/18 – 14 AWG5S075X100VATY*1.0025.40.389.70.123.10.287.0Cat. 3 UTP/12 - 10 AWGS075X125VATY*1.2531.8S075X150VATY*1.5038.10.5012.70.164.10.328.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/10 – 6 AWGS100X075VA1Y1.0025.40.7519.10.256.40.080.500.164.1Cat. 6 28 AWG/18 – 14 AWG42500S100X075VATY*5000S100X125VA1Y1.2531.80.389.70.123.10.287.0Cat. 3 UTP/12 - 10 AWG2500S100X125VATY*5000S100X150VA1Y1.5038.10.5012.70.164.10.328.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/ 10 - 6 AWG42500S100X150VATY5000S100X150VBTYTIA Blue S100X150VCTYTIA BrownS100X150VDTYTIA GreenS100X150VETYTIA GrayS100X150VFTYTIA OrangeS100X150VGTYTIA PurpleOrder number of labels required in multiples of Standard Package Quantity.*Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Representative offering only, visit www.panduit.com for complete listing of products.6Vinyl Self-Laminating Labels (continued) Part NumberPrint-On Area ColorWidthLengthPrint-On AreaHeightMin. CableO.D.Max. CableO.D.Wire RangeLabelsPerRowStd.Pkg.Qty.In.mmIn.mmIn.mmIn.mmIn.mmS100X150VHTY*TIA Red1.0025.41.5038.10.5012.70.164.10.328.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/10 – 6 AWG45000S100X150VITY*TIA YellowS100X150V0TY*BlackS100X150V9TY*GoldS100X225VA1YWhite2.2557.20.7519.10.246.10.4812.1Cat. 6 FTP/Cat. 6A UTP/Cat. 6A FTP/8 – 4 AWGS100X225VATY*WhiteS100X225VBTY*TIA BlueS100X225VCTY*TIA BrownS100X225VDTY*TIA GreenS100X225VETY*TIA GrayS100X225VFTY*TIA OrangeS100X225VGTY*TIA PurpleS100X225VHTY*TIA RedS100X225VITY*TIA YellowS100X225V0TY*BlackS100X225V9TY*GoldS100X250VA1YWhite2.5063.51.0025.40.328.10.4812.16 - 2 AWG1500S100X250VATY*5000S100X400VA1Y4.00101.61.0025.40.328.10.9524.32 - 1 AWG1000S100X400VATY*2500S100X650VA1Y6.50165.11.5038.10.4812.11.5940.41/0 - 250 MCM250S100X650VATY*1000S150X150VATY*1.5038.11.5038.10.5012.70.164.10.328.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/10 – 6 AWG25000S150X225VATY*2.2557.20.7519.10.246.10.4812.18 – 4 AWG S150X400VATY*4.00101.61.0025.40.328.10.9524.12 – 1 AWG 2500S200X150VATY*2.0050.81.5038.10.5012.70.164.10.328.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/10 – 6 AWG5000S200X225VA1Y2.2557.20.7519.10.246.10.4812.1Cat. 6 FTP/Cat. 6A UTP/Cat. 6A FTP/8 - 4 AWG500S200X225VATY*1000S200X250VATY*2.5063.51.0025.40.328.10.4812.16 – 2 AWG S200X400VA1Y4.00101.61.0025.40.328.10.9524.32 - 1 AWG500S200X400VATY*1000S200X650VA1Y6.50165.11.5038.10.4812.11.5940.41/0 - 250 MCM250S200X650VATY*1000Order number of labels required in multiples of Standard Package Quantity.*Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Contact Technical Support at 866.871.4571.7Tedlar™ Self-Laminating Labels• Self-extinguishing material• Sized specifically for wire and cable applications• Use thermal transfer hybrid ribbons shown on pages 34 and 35• Temperature range: -65°F to 275°F (-54°C to 135°C)• UL969 recognized File # MH14979; cUL recognized C22.2 No. 0.15.01, File # MH14979LabelCore™ Fiber Optic Cable Identification System • Provides a larger labeling surface on small fiber cables and allows legends to be clearly seen• Sleeves are made of flexible PVC material• Locate sleeve on straight section of cable at least 2 inches from fiber bootPart Number ColorPart DescriptionStd.Pkg.Qty.NWSLC-2YYellowYellow cable identification sleeve for 2mm simplex fiber cable, 1" long, use with labels: S100X150YAJ (Laser/Inkjet); S100X150VAC (LS8E Hand-held Printer); S100X150VA1Y or S100X150VATY (Thermal Transfer Printer).100NWSLC-2Y-AQAquaAqua cable identification sleeve for 2mm simplex cable, 1" long, use with labels: S100X150YAJ (Laser/Inkjet); S100X150VAC (LS8E Hand-held Printer); S100X150VA1Y or S100X150VATY (Thermal Transfer Printer).NWSLC-3YOrangeOrange cable identification sleeve for 3mm simplex cable, 1" long, use with labels: S100X150YAJ (Laser/Inkjet); S100X150VAC (LS8E Hand-held Printer); S100X150VA1Y or S100X150VATY (Thermal Transfer Printer).NWSLC-7YWhiteWhite cable identification sleeve for 3mm duplex fiber cable, 1" long, use with labels: S100X225YAJ (Laser/Inkjet); S100X225VAC (LS8E Hand-held Printer); S100X225VATY or S200X225VATY (Thermal Transfer Printer).Order number of labels required in multiples of Standard Package Quantity.Part NumberPrint-On Area ColorWidthLengthPrint-On AreaHeightMin. CableO.D.Max. CableO.D.Wire RangeLabelsPerRowStd.Pkg.Qty.In.mmIn.mmIn.mmIn.mmIn.mmS050X150TAT-AWhite0.5012.71.5038.10.5012.70.164.00.328.1Cat. 5e UTP/Cat. 6 UTP/Cat.6A UTP/ Cat. 5e FTP/10 – 6 AWG85000S075X125TAT-A0.7519.11.2531.80.389.70.123.10.287.0Cat. 3 UTP/12 – 10 AWG5S100X075TAT-A1.0025.40.7519.10.256.40.082.00.164.0Cat. 6 28 AWG/18 – 14 AWG42500S100X125TAT-A1.2531.80.389.70.123.10.287.012 – 10 AWGS100X150TAT-A1.5038.10.5012.70.164.00.287.1Cat. 5e UTP/Cat. 6 UTP/Cat. 6A UTP/Cat. 5e FTP/10 - 6 AWGS100X225TAT-A2.2557.20.7519.10.246.10.4812.1Cat. 6 FTP/Cat. 6A UTP/ Cat. 6A FTP/8 – 4 AWG1500S100X400TAT-A4.00101.61.0025.40.328.10.9524.32 – 1 AWG2500S200X400TAT-A2.0050.82500Tedlar® is a registered trademark of E.I. du Pont de Nemours and Company.Order number of labels required in multiples of Standard Package Quantity.*Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Representative offering only, visit www.panduit.com for complete listing of products.8Flag Labels • Halogen-free, white polyester flag-style marker for wire/cable labeling• Improved legibility and more information on small wires and cables provide clearer, more complete identification• Innovative design allows the product to be applied as a permanent adhesive label or as a repositionable non-adhesive label• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 302°F (-40°C to 150°C )• UL969 recognized, File # MH14576 and File # MH14979; cUL recognized C22.2 No. 0.15-01, File # MH14979Part NumberWidthHeightPrint-On AreaMin. CableO.D.Max. CableO.D.Wire RangeStd.Pkg.Qty.RollIn.mmIn.mmWidthHeightIn.mmIn.mmF100X150AJT1.0025.41.5038.10.8822.40.7519.10.123.10.185.112 – 10 AWG 2500F100X213AJT2.1354.10.328.10.389.73 – 2 AWGF100X300AJT3.0076.22.0050.80.092.30.287.118 – 6 AWGF100X363AJT3.6392.20.215.10.4611.78 – 1 AWGOrder number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME Printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Part Number ColorPart DescriptionStd.Pkg.Qty.NWSLC2-2YYellowYellow cable identification sleeve for 2mm simplex cable, 2 inches long, use with labels: S200X150YAJ (Laser/Inkjet) or S200X150VATY (Thermal Transfer Printer).100NWSLC2-2Y-AQAquaAqua cable identification sleeve for 2mm simplex cable, 2 inches long, use with labels: S200X150YAJ (Laser/Inkjet) or S200X150VATY (Thermal Transfer Printer).NWSLC2-3YOrangeOrange cable identification sleeve for 3mm simplex cable, 2 inches long, use with labels: S200X150YAJ (Laser/Inkjet) or S200X150VATY (Thermal Transfer Printer).NWSLC2-7YWhiteWhite cable identification sleeve for 3mm duplex fiber cable, 2 inches long, use with labels: S200X225YAJ (Laser/Inkjet) S200X225VATY (Thermal Transfer Printer).Order number of labels required in multiples of Standard Package Quantity.LabelCore™ Fiber Optic Cable Identification System (continued)
Contact Technical Support at 866.871.4571.9Non-Laminated Vinyl Cloth Labels• Thin and conformable material with repositionable adhesive allows label to be removed and reused in temporary applications• Works well on Teflon® coated wires*• Use thermal transfer hybrid ribbons shown on pages 34 and 35• Temperature range: -40° F to 170° F (-40° C to 77° C)• UL969 recognized, File # MH14576 and MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14576Part NumberPrint-On AreaColorWidthLengthMin. CableO.D.Max. CableO.D.Wire RangeLabelsPerRowStd.Pkg.Qty.In.mmIn.mmIn.mmIn.mmN025X075CBTWhite0.256.40.7519.10.123.10.164.112 – 10 AWG710000N025X125CBT1.2531.80.205.10.328.110 – 6 AWGN025X150CBT1.5038.10.246.10.4010.28 – 2 AWG2500N025X175CBT1.7544.50.287.10.4812.26 – 1 AWG10000N050X075CBT0.5012.70.7519.10.123.10.164.112 – 10 AWGN050X100CBT1.0025.40.164.10.246.110 – 8 AWGN050X125CBT1.2531.80.205.10.328.110 – 6 AWGN050X150CBT1.5038.10.246.10.4010.28 – 2 AWG2500N050X175CBT1.7544.50.287.10.4812.26 – 1 AWGN100X075CBT1.0025.40.7519.10.123.10.164.112 – 10 AWG310000N100X125CBT1.2531.80.205.10.328.110 – 6 AWG5000N100X150CBT1.5038.10.246.10.4010.28 – 2 AWGN100X175CBT1.7544.50.287.10.4812.26 – 1 AWG2500N150X075CBT1.5038.10.7519.10.123.10.164.112 – 10 AWG15000Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME Printer and 3.00" cores, the roll stand (TDP43ME-RS) is required. *Teflon® is a registered trademark of E. I du Pont de Nemours and CompanyNon-Laminated Nylon Cloth Labels • Offer crisp, clear legends with superior legibility• Used in flat applications and in a wrap format for wire/cable marking• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -65°F to 275°F (-54°C to 135°C)Part NumberColorWidthLengthMin. CableO.D.Max. CableO.D.Wire RangeLabelsPerRowStd.Pkg.Qty.In.mmIn.mmIn.mmIn.mmN050X075C1TWhite0.5012.70.7519.10.123.10.164.112 – 10 AWG510000N050X075C2TYellowN050X125C1TWhite1.2531.80.205.10.328.110 – 6 AWGN050X125C2TYellowN050X150C1TWhite1.5038.10.246.10.4010.58 – 2 AWG5000N050X125C2TYellowN100X075C1TWhite1.0025.40.7519.10.123.10.164.112 – 10 AWG310000N100X075C2TYellowN100X125C1TWhite1.2531.80.205.10.328.110 – 6 AWG5000N100X125C2TYellowN100X150C1TWhite1.5038.10.246.10.4010.28 – 2 AWGN100X150C2TYellowOrder number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME Printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Representative offering only, visit www.panduit.com for complete listing of products.10High-Temperature Flame-Retardant Marker Plates• Used for identification markers in (Class 1E) harsh environments • Compatible with Intermediate Cross Section cable ties• Use thermal transfer RMER4BL-A or RHER4BL-A resin ribbons shown on pages 34 and 35• Temperature range: -67°F to 275°F (-55°C to 135°C )Part NumberColorWidthHeightPrint-On AreaWidthLabelsPerRollStd. Pkg. Qty. (Roll)In.mmIn.mmIn.mmM200X042FQTWhite2.0050.80.4210.71.2231.05001M200X042FQT-B2000M200X080FQT0.8020.3250M200X080FQT-B2000Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Halogen-Free Flame-Retardant Marker Plates • Used to identify wires, cables, equipment, and many other applications• Offer crisp, clear legend with superior legibility and engineered to withstand high temperatures, harsh solvents, oils, and chemicals without over-lamination• Compatible with Intermediate Cross Section cable ties• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 193°F (-40°C to 90°C )Part NumberColorWidthHeightPrint-On AreaWidthLabelsPerRollStd. Pkg. Qty. (Roll)In.mmIn.mmIn.mmM200X042UPTWhite 2.0050.80.4210.71.3033.05001M200X042UPT-B2000M200X080UPT0.8020.3500M200X080UPT-B2000Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Contact Technical Support at 866.871.4571.11Standard Marker Plates• Non-adhesive and halogen free; used to identify wires, cables, equipment, and many other applications• Attachable in horizontal or vertical orientation. The 0.5" Plenum rated and 0.33" non-Plenum rated Hook & Loop Cable Ties can be used in hanging position• Meets the outgassing requirements of ASTM E-595 suitable for use in air handling spaces• Available in a variety of colors and sizes• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -58°F to 221°F (-50°C to 105°C)Part Number ColorWidthHeightPrint-On AreaWidthCable TypeLabelsPerRollStd.Pkg.Qty.(Roll)In.mmIn.mmIn.mmM200X050Y6TTIA Yellow2.0050.80.5012.71.0727.3Intermediate Cross Section Cable Ties5001M200X050Y7TWhiteM200X050ACTTIA BlueM200X050AETTIA GreenM200X050AFTTIA GrayM200X050AGTTIA OrangeM200X050AITTIA RedM200X100Y6TTIA Yellow1.0025.40.8020.3Standard Cross Section Cable TiesM200X100Y6T-B2000M200X100Y7TWhite500M200X100Y7T-B2000M200X100ACTTIA Blue500M200X100AETTIA GreenM200X100AFTTIA GrayM200X100AGTTIA OrangeM200X100AITTIA RedM300X050Y6TTIA Yellow3.0076.20.5012.72.0752.6Intermediate Cross Section Cable TiesM300X050Y7TWhiteM300X050ACTTIA BlueM300X050AETTIA GreenM300X050AFTTIA GrayM300X050AGTTIA OrangeM300X050AITTIA RedM300X100Y6TTIA Yellow1.0025.41.8045.7Standard Cross Section Cable TiesM300X100Y7TWhiteM300X100ACTTIA BlueM300X100AETTIA GreenM300X100AFTTIA GrayM300X100AGTTIA OrangeM300X100AITTIA RedOrder number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Representative offering only, visit www.panduit.com for complete listing of products.12Military Grade Single-Sided Heat Shrink Labels• Permanent, one-piece, heat shrink sleeve designed to provide clear, durable identification of wires and cables• Meet UL Standard 224 with a VW-1 rating for flammability and AMS-DTL-23053/5C (Class 1 and Class 3)• Meet SAE-AS81531, MIL-STD-883F Method 2015.13, Solutions A, B, and D, and MIL-STD-202G Method 215K, Solutions A, C, and D when printed with resin and hybrid thermal transfer ribbons• Shrink ratio 3:1• Tested for use as an identification marker in (Class 1E) harsh environments • Use thermal transfer hybrid ribbon or white resin ribbons shown on pages 34 and 35• Temperature range: -67°F to 275°F (-55°C to 135°C )• UL224 recognized, File # E205133; CSA certified, C22.2 No. 198.1.06, File # 256205Part NumberPart NumberPart Number Part NumberDiameterWidthHeightMin. CableO.D.Max. CableO.D.WireRangeLabelsPerRowLabelsPerRollStd.Pkg.Qty.(Roll)In.mmIn.mmIn.mmIn.mmIn.mmH050X025H1T*H050X025H2TH050X025H3TH050X025H4T0.133.10.5012.70.256.40.041.00.133.322 – 18 AWG420001H075X025H1T*H075X025H2TH075X025H3TH075X025H4T0.7519.121000H100X025H1T*H100X025H2TH100X025H3TH100X025H4T1.0025.4H150X025H1T*H150X025H2TH150X025H3TH150X025H4T1.5038.11500H200X025H1T*H200X025H2TH200X025H3TH200X025H4T2.0050.8H050X034H1T*H050X034H2TH050X034H3TH050X034H4T0.194.70.5012.70.348.60.061.50.194.818 – 12 AWG42000H075X034H1T*H075X034H2TH075X034H3TH075X034H4T0.7519.121000H100X034H1T*H100X034H2TH100X034H3TH100X034H4T1.0025.4H150X034H1T*H150X034H2TH150X034H3TH150X034H4T1.5038.11500H200X034H1T*H200X034H2TH200X034H3TH200X034H4T2.0050.8H050X044H1T*H050X044H2TH050X044H3TH050X044H4T0.256.30.5012.70.4411.20.082.00.256.416 – 10 AWG42000H075X044H1T*H075X044H2TH075X044H3TH075X044H4T0.7519.121000H100X044H1T*H100X044H2TH100X044H3TH100X044H4T1.0025.4H150X044H1T*H150X044H2TH150X044H3TH150X044H4T1.5038.11500H200X044H1T*H200X044H2TH200X044H3TH200X044H4T2.0050.8H050X064H1T*H050X064H2TH050X064H3TH050X064H4T0.389.70.5012.70.6416.30.133.30.389.712 – 6 AWG42000H100X064H1T*H100X064H2TH100X064H3TH100X064H4T1.0025.421000H200X064H1T*H200X064H2TH200X064H3TH200X064H4T2.0050.81500H050X084H1T0.5012.70.5012.70.8421.30.174.30.5012.78 – 1 AWG42000H100X084H1TH100X084H2TH100X084H3TH100X084H4T1.0025.421000H200X084H1TH200X084H2TH200X084H3TH200X084H4T2.0050.81500H050X165H1T1.0025.40.5012.71.6541.90.338.41.0025.44 AWG – 500 MCM41000H100X165H1TH100X165H2TH100X165H3TH100X165H4T1.0025.42500H200X165H1TH200X165H2TH200X165H3TH200X165H4T2.0050.81250H200X240H1TH200X240H2T1.5038.12.0050.82.4061.00.5012.71.5038.11 AWG – 1000 MCM1100Order number of labels required in multiples of Standard Package Quantity.*Available in Bulk packages (5 times Labels Per Roll), add -B to end of part number.^ For different ribbon colors, see pages 34 and 35.
Contact Technical Support at 866.871.4571.13Military Grade Two-Sided Heat Shrink Labels• Permanent, one-piece, heat shrink sleeve designed to provide clear, durable identification of wires and cables• Can be printed on both sides for improved visibility• Meet the material requirements and physical properties of AMS-DTL-23053/5C (Class 1 and Class 3) and UL standard 224 with a VW-1 rating• Meet SAE-AS81531, MIL-STD-883F Method 2015.13, Solutions A, B and D, and MIL-STD-202G Method 215K, Solutions A,C and D when printed using resin or hybrid thermal transfer ribbons• Shrink ratio 3:1• Tested as an identification marker for use in (Class 1E) harsh environments • Use thermal transfer hybrid ribbons shown on pages 34 and 35• Temperature range: -67°F to 275°F (-55°C to 135°C )• UL224 recognized, File # E205133; CSA certified, C22.2 No. 198.1-06, File # 256205 Order number of labels required in multiples of Standard Package Quantity.Part NumberPart NumberDiameterWidthHeightMin. CableO.D.Max. CableO.D.WireRangeLabelsPerRowLabelsPerRollStd.Pkg.Qty.(Roll)In.mmIn.mmIn.mmIn.mmIn.mmH100X025H1T-2H100X025H2T-20.133.11.0025.40.256.40.041.00.133.322 – 18 AWG210001H100X025H1T-2-BH100X025H2T-2-B5000H200X025H1T-2H200X025H2T-22.0050.81500H200X025H1T-2-BH200X025H2T-2-B2500H100X034H1T-2H100X034H2T-20.194.71.0025.40.348.60.061.50.194.818 – 12 AWG21000H100X034H1T-2-BH100X034H2T-2-B5000H200X034H1T-2H200X034H2T-22.0050.81500H200X034H1T-2-BH200X034H2T-2-B2500H100X044H1T-2H100X044H2T-20.256.31.0025.40.4411.20.082.00.256.416 – 10 AWG21000H100X044H1T-2-BH100X044H2T-2-B5000H200X044H1T-2H200X044H2T-22.0050.81500H200X044H1T-2-BH200X044H2T-2-B2500H100X064H1T-2H100X064H2T-20.389.71.0025.40.6416.30.133.30.389.712 – 6 AWG21000H100X064H1T-2-BH100X064H2T-2-B5000H200X064H1T-2H200X064H2T-22.0050.81500H200X064H1T-2-BH200X064H2T-2-B2500H100X084H1T-2H100X084H2T-20.5012.71.0025.40.8421.30.174.30.5012.78 – 1 AWG21000H100X084H1T-2-BH100X084H2T-2-B5000H200X084H1T-2H200X084H2T-22.0050.81500H200X084H1T-2-BH200X084H2T-2-B2500H100X122H1T-2H100X122H2T-20.7519.01.0025.41.2231.00.256.30.7519.08 – 4/0 AWG2500H200X122H1T-2H200X122H2T-22.0050.81250H100X165H1T-2H100X165H2T-21.0025.41.0025.41.6541.90.338.41.0025.44 AWG – 500 MCM2500H200X165H1T-2H200X165H2T-22.0025..41250
Representative offering only, visit www.panduit.com for complete listing of products.14Halogen-Free Two-Sided Heat Shrink Labels• Permanent, one-piece, heat shrink sleeve designed to provide clear, durable identification of wires and cables• Can be printed on both sides for improved visibility• Meet SAE-AS5942, MIL-STD-883F Method 2015.13, Solutions A, B, and D, and MIL-STD-202G Method 215K,Solutions A, C, and D when printed with resin and hybrid thermal transfer ribbons• Meet BS6853; 1999 Vehicle Category 1A for burning behavior and toxic gas emissions; Smoke Density Class II• Shrink ratio 2:1• Use thermal transfer hybrid ribbons shown on pages 34 and 35• Temperature range: -22°F to 221°F (-30°C to 105°C)Order number of labels required in multiples of Standard Package Quantity.Part NumberPart NumberDiameterWidthHeightMin. CableO.D.Max. CableO.D.WireRangeLabelsPerRowLabelsPerRollStd.Pkg.Qty.(Roll)In.mmIn.mmIn.mmIn.mmIn.mmH100X025HFT-2H100X025HGT-20.133.11.0025.40.256.40.061.50.133.322 – 18 AWG210001H200X025HFT-2H200X025HGT-22.0050.81500H100X034HFT-2H100X034HGT-20.194.71.0025.40.348.60.092.30.194.818 – 12 AWG21000H200X034HFT-2H200X034HGT-22.0050.81500H100X044HFT-2H100X044HGT-20.256.41.0025.40.4411.10.133.30.256.416 – 10 AWG21000H200X044HFT-2H200X044HGT-22.0050.81500H100X064HFT-2H100X064HGT-20.389.71.0025.40.6416.20.194.80.389.712 – 6 AWG21000H200X064HFT-2H200X064HGT-22.0050.81500H100X084HFT-2H100X084HGT-20.5012.71.0025.40.8421.30.256.40.5012.78 – 1 AWG21000H200X084HFT-2H200X084HGT-22.0050.81500H100X165HFT-2H100X165HGT-21.0025.41.0025.41.6541.90.5012.71.0025.48 AWG – 500 MCM2H200X165HFT-2H200X165HGT-22.0050.81250
Contact Technical Support at 866.871.4571.15Fluid-Resistant Two-Sided Heat Shrink Labels• Permanent, one-piece, heat shrink sleeve designed to provide clear, durable identification of wires and cables• Cross-linked, semi-rigid, fluid-resistant, shrinkable polyolefin material• Available in yellow only• Can be printed on both sides for improved visibility• Meet the material requirements and physical properties AMS-DTL-23053/6 Class 1 and NF F00-608 Class A and H when printed with resin thermal transfer ribbons• Meet SAE-AS5942, MIL-STD-883F Method 2015.13 Solutions A and D, and MIL-STD-202G Method 215K, Solutions A and D when printed with resin thermal transfer ribbons• Shrink ratio 3:1• Use thermal transfer RMER4BL-C resin ribbons shown on pages 34 and 35• Temperature range: -67°F to 275°F (-55°C to 135°C)Order number of labels required in multiples of Standard Package Quantity.Part NumberDiameterWidthHeightMin. CableO.D.Max. CableO.D.Wire RangeLabelsPerRowLabelsPerRollStd.Pkg.Qty.(Roll)In.mmIn.mmIn.mmIn.mmIn.mmH100X034HST-20.194.71.0025.40.348.60.061.50.194.818 – 12 AWG210001H200X034HST-22.0050.81500H100X044HST-20.256.41.0025.40.4411.10.082.00.256.416 – 10 AWG21000H200X044HST-22.0050.81500H100X064HST-20.389.71.0025.40.6416.20.133.30.389.712 – 6 AWG21000H200X064HST-22.0050.81500H100X084HST-20.5012.71.0025.40.8421.30.174.30.5012.78 – 1 AWG21000H200X084HST-22.0050.81500H100X165HST-21.0025.41.0025.41.6541.90.338.41.0025.44 AWG – 500 MCM2H200X165HST-22.0050.81250
Representative offering only, visit www.panduit.com for complete listing of products.16Terminal Block Markers• Ideally suited for terminal block labeling applications within control panels• Flexible marker design; create and install single or multiple markers in a single step• Less marker waste – print only as many as you need• Flexible halogen-free markers have superior holding strength in terminal blocks, eliminating markers that fall out• Easy-Mark Plus™ Labeling Software required for printing terminal block markers• Meets EN61010-1 (VDE 0411-1) for abrasion and wipe resistance• Meets EN ISO 175 for oil and chemical resistance• Meets EN 60464-3:2001 for resistance to solvents• Meets IEC 60947-4-1/2 for resistance to aging• Meets IEC 60068-2-8 for vibration resistance• Use thermal transfer RMER1BL resin ribbons shown on pages 34• Temperature range: -40°F to 180°F (-40°C to 82°C)Part NumberColorDescriptionWidthmmHeightmmAllen-BradleyTerminal BlockCompatabilityWeldmuller Terminal Block CompatabilityMarkersPerRollStd.Pkg.Qty.TB05X12EWT-AB1WhiteFlexible terminal block markers on continuous rolls5.012.01492-J3,1492-W3, 1492-M5X12C,1492-M5X12,1492-MS5X12,1492-MR5X12WDU 2.5WS 12/5 MC NE WS10001TB06X12EWT-AB16.012.01492-J4,1492-J10,1492-JG10,1492-W4,1492-M6X12,1492-M7X12,1492-MR6X12,1492-MS6X12WDU 41000TB08X12EWT-AB18.012.01492-J6,1492-MR8X12,1492-MS8X12,1492-WFB424,1492-WFB4250WDU 6750TB05X08EWT-AB25.08.01492-JD3,1492-L3,1492-LD3,1493-L3Q,1492-M5X10,1492-M5X8,1492-M6X10,1492-WTF3WDR 2.5WDK 2.5 ZQV1000TB06X08EWT-AB26.08.01492-JD4,1492-L4,1492-LD4WDR 4WKD 4NWDK 2.5 BLZ/7.62SAK 2.51000Order number of markers required in multiples of Standard Package Quantity.Markers will not fit inside the printer. The external roll stand (TDP43ME-RS) is required.Terminal Block Adapter Kit (TDP43ME-TB-KIT) is required to print the terminal block markers. (See page 34 for additional information.)
Contact Technical Support at 866.871.4571.17Raised Panel Push Button Labels• Deliver the look of engraved laminated plates with the convenience of printing on demand • Strong holding power for rough, textured, and powder coated surfaces • Provide crisp, clear, and durable legends for your reliable, high-performance identification needs • Meet ASTM G154 for outdoor durability (simulating 20 years of UV resistance under normal conditions but not all outdoor exposure) • Meets DIN 40050-9, IP69K for washdown applications• Meet ASTM D3389 standard for abrasion resistance and also meet solar application standards• Use thermal transfer resin ribbons shown on pages 34 and 35 • Temperature range: -40°F to 212°F (-40°C to 100°C) • UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979 Part NumberColorWidthHeightPrint-OnArea HeightHoleDiameterLabelsPerRowStd.Pkg.Qty.In.mmIn.mmIn.mmIn.mmC120X150APT-22White1.2030.51.5038.10.4511.40.8722.03500C120X150A8T-22YellowC120X150AST-22GreenC120X150AWT-22RedC120X150A0T-22BlackC120X190APT-22White1.9048.30.8521.6C120X190A8T-22YellowC120X190AST-22GreenC120X190AWT-22RedC120X190A0T-22BlackC180X180APT-30White1.8045.71.8045.70.369.11.1830.02C180X180A8T-30YellowC180X180AST-30GreenC180X180AWT-30RedC180X180A0T-30BlackC240X240APT-30White2.4061.02.4061.00.9022.91C240X240A8T-30YellowC240X240AST-30GreenC240X240AWT-30RedC240X240A0T-30BlackOrder number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Representative offering only, visit www.panduit.com for complete listing of products.18Raised Panel Push Button Over-Laminate LabelsOrder number of labels required in multiples of Standard Package Quantity.• Provide additional print protection in harsh environments• Over-laminates are not printable• Temperature range: -51°F to 275°F (-46°C to 135°C)Part NumberColorWidthHeightHoleDiameterLabelsPerRollStd.Pkg.Qty.In.mmIn.mmIn.mmC120X150YK-22Clear1.2030.51.5038.10.8722.03500C120X190YK-221.9048.3C180X180YK-301.8045.71.8045.71.1830.02C240X240YK-302.4060.92.4060.91.1830.01Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Raised Panel Half Push Button Labels• Deliver the look of engraved laminated plates with the convenience of printing on demand• Strong holding power for rough, textured, and powder-coated surfaces• Provide crisp, clear, and durable legends for your reliable, high-performance identification needs• Meets DIN 40050-9, IP69K for washdown applications • Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 212°F (-40°C to 100°C)• UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979Part NumberColorWidthHeightPrint-On Area HeightHoleDiameterLabelsPerRowStd.Pkg.Qty.In.mmIn.mmIn.mmIn.mmC180X130APT-30HWhite1.8045.71.3033.00.7318.51.1830.01500C240X200APT-30H2.4061.02.0050.81.4336.3
Contact Technical Support at 866.871.4571.19Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Part NumberColorWidthHeightLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC100X050APTWhite1.0025.40.5012.73500C100X050A8TYellowC100X050ASTGreenC100X050AUTOrangeC100X050AWTRedC100X050A0TBlackC100X050AMTSilverC125X030APTWhite1.2531.80.307.61C125X030A0TBlackC170X090APTWhite1.7043.20.9022.9C170X090A8TYellowC170X090ASTGreenC170X090AWTRedC170X090AMTSilverC200X100APTWhite2.0050.81.0025.4C200X100A8TYellowC200X100ASTGreenC200X100AUTOrangeC200X100AWTRedC200X100A0TBlackC200X100AMTSilverC252X030APTWhite2.5264.00.307.6C252X030A0TBlackC300X100APTWhite3.0076.21.0025.4C300X100A8TYellowC300X100AUTOrangeC300X100AWTRedC300X100A0TBlackC300X250APTWhite2.5063.5C300X250A8TYellowC300X250ASTGreenC300X250AUTOrangeC300X250AWTRedC300X250A0TBlackC300X250AMTSilverC350X300APTWhite3.5088.93.0076.2C350X300A8TYellowC350X300AUTOrangeC350X300A0TBlackC379X030APTWhite3.7996.30.307.6C379X030AQTBlueC379X030AWTRedC379X030A0TBlackC400X100APTWhite4.00101.61.0025.4C400X100A8TYellowC400X100ASTGreenC400X100AUTOrangeC400X100AWTRedC400X100A0TBlackC400X100AMTSilverRaised Panel Component Labels• Deliver the look of engraved laminated plates with the convenience of printing on demand • Strong holding power for rough, textured, and powder-coated surfaces • Provide crisp, clear, and durable legends for your reliable, high-performance identification needs • Meet ASTM G154 for outdoor durability (simulating 20 years of UV resistance under normal conditions but not all outdoor exposure) • Meets DIN 40050-9, IP69K for washdown applications• Meet ASTM D3389 standard for abrasion resistance, and also meet solar application standards • Use thermal transfer resin ribbons shown on pages 34 and 35 • Temperature range: -40°F to 212°F (-40°C to 100°C) • UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979
Representative offering only, visit www.panduit.com for complete listing of products.20Raised Panel Component Over-Laminate LabelsRaised Panel Pre-Printed Emergency Stop LabelsOrder number of labels required in multiples of Standard Package Quantity.• Provide additional print protection in harsh environments• Over-laminates are not printable• Temperature range: -51°F to 275°F (-46°C to 135°C)• Deliver the look of engraved plates• Strong holding power for rough, textured, and powder-coated surfaces• Meets DIN 40050-9, IP69K for washdown applications• Temperature range: -40°F to 212°F (-40°C to 100°C)• UL969 recognized, File # MH14576; cUL recognized C22.2 No. 0.15.01, File # MH14576Order number of labels required in multiples of Standard Package Quantity.Part NumberColorDiameterHoleDiameterStd.Pkg.Qty.In.mmIn.mmC235A8-30-ESBlack on Yellow2.3560.01.1830.025C235AW-30-ESWhite on RedC350A8-30-ESBlack on Yellow3.5089.0C350AW-30-ESWhite on RedPart NumberColorWidthHeightLabelsPerRollStd.Pkg.Qty.In.mmIn.mmC100X050YKClear1.0025.40.5012.71500C170X090YK1.7043.20.9022.9C200X100YK2.0050.81.0025.4C300X100YK3.0076.21.0025.4C300X250YK2.5063.5C350X300YK3.5088.93.0076.2C400X100YK4.00101.61.0025.4
Contact Technical Support at 866.871.4571.21Part NumberColorWidthHeightLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC025X025YJTWhite0.256.40.256.41210000C038X038YJT0.389.70.389.77C050X044YJT0.5012.70.4411.25C060X020YJT0.6015.20.205.13C075X025YJT0.7519.10.256.4C075X025YMTSilverC080X020YJTWhite0.8020.30.205.1C090X025YJT0.9022.90.256.4C100X025YJT1.0025.40.256.4C100X038YJT0.389.7C100X050YJT0.5012.7C100X050YKTClearC100X050YMTSilverC125X038YJTWhite1.2531.80.389.7C150X050YJT1.5038.10.5012.715000C150X075YJT0.7519.1C150X075YMTSilverC160X020YJTWhite1.6040.60.205.110000C188X030YKTClear1.8847.80.307.62500C200X025YJTWhite2.0050.80.256.45000C200X038YJT0.389.7C200X050YJT0.5012.7C200X100YJT1.0025.42500C200X100YKTClearC200X100YMTSilverC275X125YJTWhite2.7569.91.2531.8C275X125YMTSilverC300X025YJTWhite3.0076.20.256.45000C300X038YJT0.389.7C300X100YJT1.0025.42500C300X100YMTSilverC300X200YJTWhite2.0050.81000C300X200YMTSilverC350X100YJTWhite3.5088.91.0025.42500C400X100YJT4.00101.6C400X200YJT2.0050.81000C400X200YMTSilverC400X300YJTWhite3.0076.22500C400X400YJT4.00101.61000C400X600YJT6.00152.4Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Polyester Component Labels• Provide durability; high-temperature resistance and dimensional stability; does not easily stretch or tear• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 302°F (-40°C to 150°C)• UL969 recognized, File # MH14576 and File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979
Representative offering only, visit www.panduit.com for complete listing of products.22Part NumberColorWidthHeightType of ApplicationLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC061X030YPTWhite0.6115.50.307.61-port42500C100X050YPT1.0025.40.5012.7general identifier310000C125X030YPT1.2531.80.307.62-port2500C138X019YPT1.3835.10.194.8module1C188X030YPTWhite1.8847.80.307.63-portC200X100YPT2.0050.81.0025.4general identifierC200X100Y0TBlackC252X030YPTWhite2.5264.00.307.64-portC252X030YPT-P*1, 2, 3, or 4-portC252X030YQT-P*TIA BlueC252X030YRT-P* TIA BrownC252X030YST-P*TIA GreenC252X030YTT-P*TIA GrayC252X030YUT-P*TIA OrangeC252X030YVT-P*TIA PurpleC252X030YWT-P*TIA RedC252X030Y0T-P*BlackC252X030Y8T-P*TIA YellowC252X030Y9T-P*GoldC261X030YPTWhite2.6166.30.307.64-portC275X125YPT2.7569.91.2531.8general identifierC275X125Y0TBlackC288X030YPTWhite2.8873.20.307.65-portC300X200YPT3.0076.22.0050.8general identifierC315X030YPT3.1580.00.307.65-portC379X030YPT3.7996.30.307.66-portC379X030YPT-P*1, 2, 3, 4, 5 or 6-portC379X030YQT-P*TIA BlueC379X030YRT-P*TIA BrownC379X030YST-P*TIA GreenC379X030YTT-P*TIA GrayC379X030YUT-P*TIA OrangeC379X030YVT-P*TIA PurpleC379X030YWT-P*TIA RedC379X030Y0T-P*BlackC379X030Y8T-P*TIA YellowC379X030Y9T-P*GoldC400X200YPTWhite4.00101.62.0050.8general identifer1000C400X200Y8TYellow2.0050.81000C400X300YPTWhite3.0076.22500*Label is perforated to be used in 1, 2, 3, 4, or 6-Port position applications.Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Super-Tack Polyester Component Labels• Provide durability; high-temperature resistance and dimensional stability; does not stretch or easily tear; and has high-tack permanent adhesive• Used to identify patch panels, faceplates, punchdown blocks, and other network systems hardware• Meets DIN 40050-9, IP69K for washdown applications• Use thermal transfer resin ribbons on pages 34 and 35• Temperature range: -40°F to 302°F (-40°C to 150°C)• UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979
Contact Technical Support at 866.871.4571.23Tedlar® Component Labels• Self-extinguishing and ideal for labeling high-temperature areas• Meet Federal Motor Vehicle Safety Standard (FMVSS-302) for flammability• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 225°F (-40°C to 106°C); tests at 275°F have shown acceptable resultsPart NumberColorWidthHeightLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC060X020TJTWhite0.6015.20.205.1310000C090X025TJT0.9022.90.256.4C100X038TJT1.0025.40.389.7C100X050TJT0.5012.7C125X038TJT1.2531.80.389.72500C200X038TJT2.0050.815000C200X100TJT1.0025.42500C300X038TJT3.0076.20.389.75000Tedlar® is a registered trademark of E.I. du Pont de Nemours and Company.Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Tamper-Evident Polyester Component Labels• Leaves a checkerboard of silver material allowing you to see if label has been tampered with• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 302°F (-40°C to 150°C)• UL969 recognized, File # MH14576 and File # MH14979Part NumberColorWidthHeightLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC075X025AATSilver0.7519.10.256.4310000C100X050AAT1.0025.40.5012.7C200X100AAT2.0050.81.0025.412500C275X125AAT2.7569.91.2531.8Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Representative offering only, visit www.panduit.com for complete listing of products.24Part NumberColorWidthHeightLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC050X044CBTWhite0.5012.70.4411.2510000C060X020CBT0.6015.20.205.13C075X025CBT0.7519.10.256.4C100X025CBT1.0025.4C100X038CBT0.389.7C100X050CBT0.5012.7C150X075CBT1.5038.10.7519.115000C160X020CBT1.6040.60.205.110000C200X050CBT2.0050.80.5012.75000C400X100CBT4.00101.61.0025.42500Non-Adhesive Polyester Component LabelsVinyl Cloth Component Labels• Used to identify patch panels, faceplates, punchdown blocks, and other network systems hardware• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -10°F to 302°F (-23°C to 150°C)• Ideal for temporary marking of chips, boards, and ICs• Removable without leaving any residue • Pliable material is suitable for rough texture surfaces• Use thermal transfer hybrid ribbons shown on pages 34 and 35• Temperature range: 50°F to 170°F (10°C to 77°C)• UL969 recognized, File # MH14576 and File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14576Part NumberColorWidthHeightApplicationLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC150X030Y1TWhite1.5038.10.307.63-port identifier21000C195X040Y1T1.9549.50.4010.2Single-gang faceplateC261X035Y1T2.6166.30.358.94-port identifierC288X040Y1T2.8873.20.4010.2Double-gang faceplateC390X030Y1T3.9099.10.307.66-port identifierC750X050Y1T7.50190.50.5012.7110 blockC788X050Y1T7.88200.20.5012.7GP6™ Punchdown SystemOrder number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Contact Technical Support at 866.871.4571.25Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Part NumberColorWidthHeightLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC025X025KBTWhite0.256.40.256.41210000C025X025KCTTa nC038X038KBTWhite0.389.70.389.77C038X038KCTTa nC050X013KBTWhite0.5012.70.133.35C050X013KCTTa nC050X020KBTWhite0.205.1C050X044KBT0.4411.2C050X044KCTTa nC060X020KBTWhite0.6015.30.205.13C060X020KCTTa nC080X020KBT0.8020.30.205.1C090X025KBT0.9022.90.256.4C100X019KBT1.0025.40.194.8C100X025KBT0.256.4C100X025KCTTa nC100X038KBTWhite0.389.7C100X038KCTTa nC125X025KBTWhite1.2531.80.256.4 2C150X025KBT1.5038.15000C160X020KBT1.6040.60.205.1110000C200X025KBT2.0050.80.256.45000C200X038KBT0.389.7Polyimide Component Labels• Ideal for electronic components and internal circuitry applications• Intended for applications requiring solvent and high-temperature resistance performance, such as the wave solder process• Use thermal transfer RMER4BL-C or RHER4BL-C resin ribbons on white polymide shown on pages 34 and 35• Use thermal transfer hybrid ribbons on tan polyimide labels shown on pages 34 and 35• Temperature range: -40°F to 350°F (-40°C to 177°C)• UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979
Representative offering only, visit www.panduit.com for complete listing of products.26Paper Component Labels• General purpose material • Use thermal transfer hybrid ribbons shown on pages 34 and 35• Temperature range: -65°F to 160°F (-54°C to 71°C)• UL969 recognized, File # MH14576 and File # MH14979Part NumberColorWidthHeightLabelsPerRowStd.Pkg.Qty.In.mmIn.mmC075X025PBTWhite0.7519.10.256.4310000C100X050PBT1.0025.40.5012.7C200X100PBT2.0050.81.0025.412500C300X200PBT3.0076.22.0050.81000C400X100PBT4.00101.61.0025.42500C400X200PBT2.0050.81000C400X300PBT3.0076.22500C400X500PBT5.00127.01000C400X600PBT6.00152.4Order number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.Reflective Continuous Tapes• Used for illuminating or highlighting a range of objects• Offer crisp, clear legends with superior legibility• Conformable material for flat applications and safety and facility identification• Can be over-laminated to increase durability (see page 28)• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 180°F (-40°C to 82°C)• UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979Part NumberColorWidthLengthStd.Pkg.Qty.(Roll)In.mmFt.mT100X000RPTWhite1.0025.450.015.21T100X000RUTOrangeT100X000RWTRedT100X000RXTYellowT200X000RPTWhite2.0050.8T200X000RUTOrangeT200X000RWTRedT200X000RXTYellowT300X000RPTWhite3.0076.2T400X000RPT4.00101.6T400X000RQTBlueT400X000RUTOrangeT400X000RWTRedT400X000RXTYellowOrder number of labels required in multiples of Standard Package Quantity.Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Contact Technical Support at 866.871.4571.27Part NumberColorMaterialTemperatureRangeWidthLengthStd.Pkg.Qty.(Roll)In.mmFt.mT024X000FJT*WhitePolyolefin-40°F to 180°F (-40°C to 82°C)0.246.1100.030.51T031X000FJT*0.317.9T038X000FJT*0.389.7T050X000FJT*0.5012.7T100X000VP1YVinyl-58°F to 176°F (-50°C to 80°C)1.0025.4T100X000VQ1YBlueT100X000VS1YGreenT100X000VU1YOrangeT100X000VW1YRedT100X000VX1YYellowT100X000VY1YBlackT100X000YK1ClearPolyester-40°F to 302°F (-40°C to 150°C) T200X000VP1YWhiteVinyl-58°F to 176°F (-50°C to 80°C)2.0050.8T200X000VQ1YBlueT200X000VR1YBrownT200X000VS1YGreenT200X000VT1YGrayT200X000VU1YOrangeT200X000VV1YPurple T200X000VW1YRedT200X000VX1YYellowT200X000VY1YBlackT200X000YK1ClearPolyester-40°F to 302°F (-40°C to 150°C) T400X000VP1YWhiteVinyl-58°F to 176°F (-50°C to 80°C4.00101.6T400X000VQ1YBlueT400X000VR1YBrownT400X000VS1YGreenT400X000VT1YGrayT400X000VU1YOrangeT400X000VV1YPurpleT400X000VW1YRedT400X000VX1YYellowT400X000VY1YBlackT400X000YK1ClearPolyester-40°F to 302°F (-40°C to 150°C) Continuous Tapes• Offer crisp, clear legends with superior legibility• Conformable material for flat applications and safety and facility identification• Can be over-laminated to increase durability (see page 28)• Use thermal transfer resin ribbons shown on pages 34 and 35• For white, black, clear, blue, and yellow vinyl continuous tapes only: UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979Order number of rolls required in multiples of Standard Package Quantity.*Labels are roll mounted on 3.00" cores; when using the TDP43ME printer and 3.00" cores, the roll stand (TDP43ME-RS) is required.
Representative offering only, visit www.panduit.com for complete listing of products.28Super-Tack Polyester Continuous Tapes• Thermal transfer printable continuous tape format• Super-tack polyester has ultra-aggressive adhesive• Ideal for rough, textured, and coated surfaces• Applications include rack unit labeling, cabinets, cable tray, pathways, control panels, enclosures, pipes, and much more• Meets DIN 40050-9, IP69K for washdown applications.• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 302°F (-40°C to 150°C)• UL969 recognized, File # MH14979, cUL recognized, C22.2 No. 0.15.01, File # MH14979Order number of labels required in multiples of Standard Package Quantity.Non-Printable Clear Over-Laminate Continuous Tapes• Over-laminates can be used for additional protection over the 2" and 4" continuous tapes• When over-laminates are used with Super-Tack Polyester Labels, the labels meet DIN 40050-9, IP69K for washdown applications• Temperature range: -40°F to 302°F (-40°C to 150°C)Order number of labels required in multiples of Standard Package Quantity.Part NumberColorMaterialWidthLengthStd. Pkg. Qty. In.mmFt.mT225X000YK1ClearPolyester2.2557.2100.030.51T425X000YK14.25107.9Part NumberColorMaterialWidthLengthStd.Pkg.Qty.(Roll)In.mmFt.mT038X000Y01BlackPolyester0.389.7100.030.51T038X000YP1WhiteT050X000Y01Black0.5012.7T050X000YP1WhiteT100X000Y01Black1.0025.4T100X000Y81YellowT100X000YP1WhiteT100X000YQ1BlueT100X000YS1GreenT100X000YU1OrangeT100X000YW1RedT200X000Y01Black2.0050.8T200X000Y81YellowT200X000YP1WhiteT200X000YQ1BlueT200X000YS1GreenT200X000YU1OrangeT200X000YW1RedT400X000Y01Black4.00101.6T400X000Y81YellowT400X000YP1WhiteT400X000YQ1BlueT400X000YS1GreenT400X000YU1OrangeT400X000YW1Red
Contact Technical Support at 866.871.4571.29Super-Tack Polyester Arc Flash LabelsRaised Panel Arc Flash Labels• Provide employees with the highest degree of safety through proper identification and communication• Detailed formats compliant with NFPA 70E standard for Arc Flash labeling• Clearly visible and recognizable hazard information to communicate arc flash hazards present• Meets DIN 40050-9, IP69K for washdown applications • Labels are constructed of durable polyester designed to withstand UV exposure, outdoor use, water and abrasion• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 302°F (-40°C to 150°C)• UL969 recognized; File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979• Super-Tack adhesive provides strong holding power for rough, textured, and powered-coated surfaces• Meet ASTM G154 for outdoor durability (simulating 20 years of UV resistance under normal conditions but not all outdoor exposures)• Meet ASTM D3389 standard for abrasion resistance, and also meets solar application standards• Meets DIN 40050-9, IP69K for washdown applications• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature Range: -40°F to 212°F (-40°C to 100°C)• UL969 recognized, File # MH14979, cUL recognized, C22.2 No. 0.15.01, File # MH 14979Part NumberWidthHeightPart DescriptionStd. Pkg. Qty.(Roll)In.mmInmmC200X400A512.0050.84.00101.6Polyester safety label, WARNING header orange and black, 250 labels per roll.1C200X400YZ1Polyester safety label, DANGER header red and white, 250 labels per roll.C400X400A514.00101.6Polyester safety label, WARNING header orange and black, 250 labels per roll.C400X400YZ1Polyester safety label, DANGER header red and white, 250 labels per roll.C400X600A516.00152.4Polyester safety label, WARNING header orange and black, 100 labels per roll.C400X600YX1Polyester safety label, orange header, 100 labels per roll.C400X600YZ1Polyester safety label, DANGER header red and white, 100 labels per roll.Order number of labels required in multiples of Standard Package QuantityPart NumberColorWidthHeightPart DescriptionStd. Pkg. Qty.(Roll)In.mmInmmC400X400ANTOrange4.00101.64.00101.6Raised Panel Safety Label, WARNING header, White and Orange/Black1WhiteC400X400AOTRedRaised Panel Safety Label, DANGER header, White and Red/BlackWhiteOrder number of labels required in multiples of Standard Package QuantityC400X400ANTC400X400AOTC400X400YZ1C200X400A51C400X600YX1C400X600A51C400X600YZ1C400X400A51C200X400YZ1
Representative offering only, visit www.panduit.com for complete listing of products.30Super-Tack Polyester Arc Flash Continuous TapesPart NumberWidthHeightPart DescriptionLabels Per RowStd. Pkg. Qty.(Roll)In.mmInmmC400X600A414.00101.66.00152.4Polyester safety label, DANGER header, red and black/white, 100 labels per roll.11C400X600A61Polyester safety label, CAUTION header, yellow/black, 100 labels per roll.C400X600AX1Polyester safety label, NOTICE header, blue/white, 100 labels per roll.C400X600AY1Polyester safety label, SAFETY FIRST header, green/ white, 100 labels per roll.C400X600AZ1Polyester safety label, yellow header, 100 labels per roll.C400X600Y81Polyester safety label, yellow, 100 labels per roll.Order number of labels required in multiples of Standard Package QuantityPart NumberWidthHeightPart DescriptionStd. Pkg. Qty.(Roll)In.mmFtMT400X000YX14.00101.650.015.2Polyester arc flash continuous tape, orange header.1T400X000A91Polyester arc flash continuous tape, red header.Order number of labels required in multiples of Standard Package QuantitySuper-Tack Polyester Facility Identification Labels• Facility Identification created quickly to comply with workplace safety regulations contributing to the protection of employees and equipment from unexpected hazards• Meets DIN 40050-9, IP69K for washdown applications • Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 302°F (-40°C to 150°C)• UL969 recognized; File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979C400X600A41C400X600AX1C400X600A61C400X600AY1C400X600AZ1C400X600Y81T400X000YX1T400X000A91• Super-tack polyester has ultra-aggressive adhesive• I deal for rough, textured, and coated surfaces • Meets DIN 40050-9, IP69K for washdown applications• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 302°F (-40°C to 150°C)• UL969 recognized; File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979
Contact Technical Support at 866.871.4571.31Polyester Photoluminescent Tapes• Used to mark egress routes, fire alarms, and fire equipment• Clearly visible for up to ten hours after power is lost• Absorbs energy from ambient light and releases this energy in the form of a glow when power is lost• Can be over-laminated to increase durability (see page 28)• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: 40°F to 230°F (4.4°C to 110°C)• UL969 recognized, File # MH14979Normal LightingBlackoutPart NumberColorWidthLengthStd. Pkg. Qty. (Roll)In.mmFtMT200X000Y2TPhotoluminescent2.0050.815.04.51T400X000Y2T4.00101.6Order number of labels required in multiples of Standard Package QuantityPart NumberColorWidthHeightLabels Per RowStd. Pkg. Qty.In.mmIn.mmC200X100AWTRed2.0050.81.0025.41500C300X250AWT3.0076.22.5063.5C400X100AWT4.00101.61.0025.4Order number of labels required in multiples of Standard Package QuantityRaised Panel Solar Labels• Print customized labels for solar applications• Strong holding power for rough, textured, and coated surfaces• Meet ASTM G154 for outdoor durability (simulating 20 years of UV resistance under normal conditions but not all outdoor exposures• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature Range: -40°F to 212°F (-40°C to 100°C)• UL969 recognized, File # MH14979, cUL recognized, C22.2 No. 0.15.01, File # MH 14979
Representative offering only, visit www.panduit.com for complete listing of products.32Reflective Continuous Tapes for Solar Applications• Used for illuminating or highlighting a range of objects• Conformable material for flat applications and safety and facility identification• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature Range: -40°F to 180°F (-40°C to 82°C)• UL969 recognized, File # MH14979, cUL recognized, C22.2 No. 0.15.01, File # MH 14979Super-Tack Polyester Solar Labels• Solar Labels are designed to meet required safety standards for PV installation labeling.• Certain labels leave blank spaces where variable thermal transfer printing can be added when specific on-site power and series data is required.• Meets DIN 40050-9, IP69K for washdown applications• This product solution has an optional clear over-laminate to function in harsh environments.• All labels are outdoor rated and are designed to have high resistance to direct UV exposure.• Use thermal transfer resin ribbons shown on pages 34 and 35• Temperature range: -40°F to 180°F (-40°C to 82°C) • UL969 recognized; File # MH14979; cUL recognized, C22.2 No. 0.15.01, File # MH14979Part NumberColorWidthHeightApplicationStd. Pkg.Qty.In.mmInmmC300X150SL1-OLClear1.5038.13.0076.2Additional Abrasion and UV Protection250C400X200SL1-OL2.0050.84.00101.6Additional Abrasion and UV ProtectionC400X400SL1-OL4.00101.6Additional Abrasion and UV ProtectionC600X175SL1-OL1.7544.56.00152.4Additional Abrasion and UV ProtectionOrder number of labels required in multiples of Standard Package QuantityOver-Laminate LabelsPart NumberColorWidthHeightApplicationLegendStd. Pkg.Qty.(Roll)In.mmInmmC400X200SP1-ADWhite on Red4.00101.62.0050.8AC DisconnetVOLTAGE AND CURRENT RATINGS50C400X400SP1-ASM4.00101.6AC Photovoltaic ModuleVOLTAGE CURRENT AND POWER RATINGSC400X400SP1-DDDC DisconnectVOLTAGE AND CURRENT RATINGSC400X400SP1-DSMDC Photovoltaic ModuleVOLTAGE CURRENT AND POWER RATINGSC400X400SP1-PSPhotovoltaic Power SourceVOLTAGE AND CURRENT RANTINGSC600X175SP1-AD6.00152.41.7544.5AC DisconnectPHOTOVOLTAIC - AC DISCONNECTC600X175SP1-DDDC DisconnectPHOTOVOLTAIC - DC DISCONNECTOrder number of labels required in multiples of Standard Package QuantityPart NumberColorMaterialWidthHeightStd. Pkg. Qty. (Roll)In.mmFt.MT400X000RW1RedPolyester4.00101.650.015.21Order number of labels required in multiples of Standard Package Quantity
Contact Technical Support at 866.871.4571.33Easy-Mark Plus™ Labeling SoftwareCAD-Connect™ Labeling Software• Powerful, easy-to-use, and affordable software that provides innovative features and functionality to address unique labeling needs • Quickly create simple or complex labels with text boxes, lines, frames, or tables, and other useful tools• Design detailed labels with multiple zones and objects for applications such as rating plates, arc flash labels, and fiber optic enclosures• Simple user interface shows labels on the screen as they will be printed• Create and print labels using QR codes, or any of the other 21 included barcode symbologies• Upgrades available at http://www.panduit.com/empSystem Requirements:• 300 MB hard drive space and 2 GB Memory• Windows XP, Vista, 7, 8, 8.1 or 10• 32 or 64 bit operating systems• Microsoft.NET Framework 2.0 or higher• Mouse or compatible pointing device• Keyboard• Optical Disc Drive or USB Port• Facilitates quick and easy organization of identifiers from CAD for printing within Easy-Mark Plus™ Labeling Software• Easily captures and organizes CAD data for future use and documentation • Saves time and reduces errors by utilizing identifiers previously created in CAD files to eliminate manual entry of data into labeling software• Compatible with full versions of AutoCAD* 2002 to 2017 and Visio version 2002 or newer• Exports to alternative formats such as Excel^ (XLS) or Text (CSV) files for future use and documentation• For software upgrades, visit www.panduit.com, click on Support and then DownloadsSystem Requirements:• 64 MB hard drive space and 64 MB RAM (256 MB RAM recommended)• Windows 2000, XP, Vista, 7, 8, 8.1• 32 or 64 bit operating systems• Microsoft.NET Framework 2.0 or higher• Mouse or compatible pointing device• Keyboard• Optical Disc Drive^Visio, Windows and EXCEL are registered trademarks of Microsoft Corp. in the United States and/or other countries.*AutoCAD is a registered trademark of Autodesk, Inc.Part NumberColorStdPkg.QtyStd.Ctn.Qty.PROG-CCCDCAD-Connect™ Labeling Software, including Easy-Mark Plus™ Labeling Software, CD-ROM.110^Windows is a registered trademark of Microsoft Corp. in the United States and/or other countries.Part NumberDescriptionStdPkg.QtyStd.Ctn.Qty.EMPLUS-CDEasy-Mark Plus™ Labeling Software, CD-ROM.110EMPLUS-DLEasy-Mark Plus™ Labeling Software, online download.EMPLUS-2GOEasy-Mark Plus™ Portable Application, USB flash drive.EMPLUS-SERVEREasy-Mark Plus™ Labeling Software, networkable server based version.
Representative offering only, visit www.panduit.com for complete listing of products.34TDP43ME Desktop Printer and Accessories• Creates durable, crisp, clear legends and graphics that offer superior legibility• Prints durable legends for harsh industrial environments• Fine resolution for small type characters and images• Easy-Mark Plus™ Labeling Software included with printer• Up to 4 inches per second print speed• Auto-sensing label gap and black mark sensors• One-button operation, and automatic self test• Connects quickly and easily to PC, and offers connectivity flexibility to print by USB, parallel serial, or Ethernet• Easy ribbon loading reduces printer down time• Able to connect to a network for sharing capability• UL60950 listed, File # E165747Part NumberPart DescriptionStdPkg.QtyTDP43ME300 dpi printer; includes printer, Panduit® Easy-Mark Plus™ Labeling Software, RMEH4BL black hybrid ribbon, AC power adapter with US power cord, USB cable, user manual, quick start card, and driver disk; for use in North America.1TDP43ME/E300 dpi printer; includes printer, Panduit® Easy-Mark Plus™ Labeling Software, RMEH4BL black hybrid ribbon, EuroPlug cord, USB cable, user manual, quick start card, and driver disk; for use outside North America.TDP43ME-KITTDP43ME printer kit. Includes: printer, Panduit® Easy-Mark Plus™ Labeling Software, RMEH4BL black hybrid ribbon, AC power adapter with US power cord, USB cable, user manual, quick start card, TDP43ME-RS Roll Stand, TDP43ME-CASE, one roll of S100X150VATY labels, and driver disk; for use in North America.TDP43ME-TB-KITTerminal Bloack Marker adapter kit for TDP43ME printer.TDP43ME/E-KITTDP43ME/E printer kit. Includes: printer, Panduit® Easy-Mark Plus™ Labeling Software, RMEH4BL black hybrid ribbon, AC power adapter with EuroPlug cord, USB cable, user manual, quick start card, TDP43ME-RS Roll Stand, TDP43ME-CASE, one roll of S100X150VATY labels, and driver disk; for use outside North America.TDP43ME-ACReplacement AC power adapter with power cord (US cord only).TDP43ME-CASEHardside carrying case accommodates printer, AC power adapter, ribbons, printer cable, external roll stand, labels, and tools.TDP43ME-CUTTEROptional power/automatic cutter for TDP43ME thermal transfer desktop printer; easy to install for automatic cutting of labels.TDP43ME-RSExternal label roll stand for TDP43ME printer; used to rear feed labels that are supplied on 3" cores.TDP43ME-SPINDLEReplacement ribbon spindle for TDP43ME Thermal Transfer Desktop Printer, Package of Two Spools.TDP43ME-TB-KITTerminal block marker adapter kit.PTR-CLNPrinter cleaning kit – contains (1) cleaning pen, (8) cleaning solution soaked wipes, (8) foam swabs pre-saturated with cleaning solution, MSDS, and cleaning instructions.TDP43ME Desktop Printer RibbonsPart NumberPart DescriptionWidthLengthStd.Pkg.Qty.In.mmFt.mRMER1BLBlack resin thermal transfer ribbon. Use with terminal block markers.1.127.9300.091.41RMEH4BL*Black hybrid thermal transfer ribbon. Use with heat shrink, self-laminating, Turn-Tell®, tan polyimide labels, and vinyl cloth labels.4.25108.0RMER4BL*^Black resin thermal transfer ribbon. Use with polyester labels, continuous vinyl tape, marker plates, and raised panel labels.RMER4BL-ABlack resin thermal transfer ribbon. Use with high-temperature marker plates.RMER4BL-CBlack resin thermal transfer ribbon. Use with fluid-resistant heat shrink labels and white polyimide labels.Order number of ribbons required in multiples of Standard Package Quantity.*For 2.5" wide ribbons, replace 4 in part number with 2. For example, the part number of a 2.5" wide black hybrid thermal transfer ribbon is RMEH2BL.^Other colors available, change "BL" to: BU for Blue, GR for Green, RD for Red, or WH for White (Eample: RMER4BU = Blue Resin Ribbon).
Contact Technical Support at 866.871.4571.35TDP43HE and TDP46HE Desktop Printers and Accessories• Convenient, easy setup; quickly begin producing labels• Durable, clear communication through superior legibility• Print small, fine characters and high-quality images and bar codes• Allow continuous use in construction, industrial, and harsh environments• Reduce time required to switch between label styles• Fast label production without sacrificing print quality• Easy-Mark Plus™ Labeling Software included with printer• Up to 8 inches per second print speed• Connect quickly and easily to PC, and offers connectivity flexibility to print by USB, parallel, Ethernet or serial• Available with 300 or 600 dots per inch print resolution• Able to connect to a network for sharing capability• UL60950 listed, File # E165747 Part NumberPart DescriptionStdPkg.QtyTDP43HE300 dpi printer; includes printer, Panduit® Easy-Mark Plus™ Labeling Software, RHEH4BL black hybrid ribbon, USB cable, user manual, quick start card, driver disk and US power cord; for use in North America.1TDP43HE/E300 dpi printer; includes printer, Panduit® Easy-Mark Plus™ Labeling Software, RHEH4BL black hybrid ribbon, USB cable, user manual, quick start card, driver disk, and the following power cords: EuroPlug, Swiss, UK, and Japan JIS 8303 3-pin; for use outside North America.TDP46HE600 dpi printer; includes printer, Panduit® Easy-Mark Plus™ Labeling Software, RHEH4BL black hybrid ribbon, USB cable, user manual, quick start card, driver disk, and US power cord; for use in North America.TDP46HE/E600 dpi printer; includes printer, Panduit® Easy-Mark Plus™ Labeling Software, RHEH4BL black hybrid ribbon, USB cable, user manual, quick start card, driver disk, and the following power cords: Europlug, Swiss, UK, and Japan JIS 8303 3-pin; for use outside North America.PTR-CLNPrinter cleaning kit – contains (1) cleaning pen, (8) cleaning solution soaked wipes, (8) foam swabs pre-saturated with cleaning solution, MSDS, and cleaning instructions.TDP43HE and TDP46HE Desktop Printer RibbonsPart NumberPart DescriptionWidthLengthStd.Pkg.Qty.In.mmFt.mRHEH4BLBlack hybrid thermal transfer ribbon. Use with heat shrink, self-laminating, Turn-Tell®, and vinyl cloth and tan polyimide labels.4.33110.01181.0363.01RHER4BLBlack resin thermal transfer ribbon. Use with polyester labels, continuous vinyl tape, marker plates, and raised panel labels.RHER4WHWhite resin thermal transfer ribbon. Use with polyester labels, continuous vinyl tape, marker plates, and raised panel labels.4.50114.3RHER4BL-ABlack resin thermal transfer ribbon. Use with high-temperature marker plates.4.33110.0RHER4BL-CBlack resin thermal transfer ribbon. Use with fluid resistant heat shrink markers and white polyimide labels.RHER4BL-EBlack resin thermal transfer ribbon. Used with standard marker plates and component labels for extra durability for harsh environments.1345.0410.0Order number of ribbons required in multiples of Standard Package Quantity.
©2019 Panduit Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. IDLC08--SA-ENG (Replaces IDLC06--SA-ENG) 1/2019Panduit Corp.World HeadquartersTinley Park, IL 60487cs@panduit.comUS and Canada: 800.777.3300Europe, Middle East, and Africa: 44.20.8601.7200Latin America: 52.33.3777.6000Asia Pacific: 65.6305.7575www.panduit.com
