25CARLO GAVAZZI Automation Components. Speci cations are subject to change without notice. Illustrations are for example only.25Building automation• CO2, temperature and humidity sensors• CO2 measuring range: 0 to 2000 ppm• Temperature measuring range: -20°C to 50 °C• Humidity measuring range: 0 to 100 %R• LCD Display and touch function to activate back-light and change signal typeEnvironmental sensors• Small sized for eurobox mounting• Values readout: A, V, W, Wdmd, VA, var, PF, kWh• Range up to 700 m in open air• Direct connection up to 16 AWireless energy meter• Input module with 4 configurable inputs: S0 class B pulse counter or voltage free input• Count values are stored in non-volatile memory• Counts up to 99999999 with rollover• Range up to 700 m in open airWireless input module• Universal dimmer switch for R, L, C up to 200 W and LED loads• Automatic load detection for L, R, C loads• Range up to 700 m in open air• Capacitive touch buttons for a plug&play replacement of standard switches (Bticino only)Wireless dimmer• Output modules with two 0-10 V outputs• Input modules for thermistor, resistor and voltage measuring: pt1000, ni1000, 10K3 thermistor input, 1-11K resistor input, 0-10 V input, 4-20 mA• Small dimensions for decentralized installationsDecentral analogue input/output modules• Small sized single relay output• Load: 16 A / 250 VAC• Withstands 130 A inrush current• Bus poweredDecentral relay modules• I/O module to control two fire dampers• Box ready for wall mounting near dampers• Four contact inputs, two relay outputs 230 VAC / 5 A• Power supply: 24 to 230 VAC• Degree of protection: IP55Fire damper• Light, wind, temperature measurement• Ranges: 0 to 100K lux, 0 to 35 m/s, -40°C to 80°C• Rain sensor included• Integrated GPS receiver• Modbus RS485 protocolWeather station• 4.3’’ and 7’’ colour displays• Easy setup of graphic pages and functions with the powerful Wizard software• BACnet and KNX gateway• Support viewing from IP cameras• Ethernet connectionTouch display• Small sized single relay output for eurobox mounting• Energy reading• Range up to 700 m in open air• Load: 10 A/250 VAC• Capacitive touch buttons for a plug&play replacement of standard switches (Bticino only)Wireless relays• 4 individually programmable push buttons• Blue and red LEDs for wireless field power and battery level• Battery supplied• SHA4XWLS4: developed to fit into wall socket and frames from Fuga, NIKO and Bticino• SHE5XWLS4: developed to fit into wall socket and frames from Elko, Gira and JungWireless light switches• Input module with 4 configurable inputs: S0 class B pulse counter or voltage free input• Count values are stored in non-volatile memory• Counts up to 99999999 with rollover• Bus poweredInput module / Pulse counterThe Dupline® bus provides several advantages to building automation systems. The simplified wiring and high flexibility of the bus-powered sensors and decentralized I/O modules can provide considerable installation cost reductions. Due to the cost-effective design of the smart-house modules, this can be achieved by using materials with a cost comparable to the traditional hardwired solutions.The issue is to interface Dupline® and Energy Meters to the building automation controllers and building management systems and with the UWP 3.0 BACnet controller, all data points from Dupline® and Energy Meters are now automatically made available as BACnet objects, ready to be used by any building automation controller or BMS from the major suppliers.
