www.se.com20PresentationLine componentsABCDEFCanalis KN is designed for low-power distribution. There are two versions:• Canalis KNA: busbar trunking with four live conductors (3L + N + PE), for distribution up to 160 A.• Canalis KNT: identical to KNA, but equipped with a transmission bus with three 2.5 mm2 conductors (except 160 A). This bus can be used to set up simple control/monitoring systems (lighting or other loads).The degree of protection of KNA and KNT trunking is IP55All the insulating and plastic materials are halogen-free and have enhanced fire-withstand capabilities: incandescent wire test as per standard IEC 60695-2 (960°C for components in contact with live parts and 650°C for other components).Feed unitsSupply a Canalis KN line, via a cable. They can be mounted at the end of a line (end feed) or in the middle (central feed). These units are made of moulded plastic for the 40, 63 and 100 A ratings and metal for the 160 A rating. They are equipped with:• terminals for 16 mm2 copper cables on the 63 A feed units, copper contacts for 35 mm2 lugs on the 100 A feed units and for 95 mm2 lugs on the 160 A feed units• multi-diameter knock-outs until 100 A rating and cable-gland plates for the 160 A rating• a 3 x 2.5 mm2 terminal block for connection of the remote-transmission cable (Canalis KNT).Feed units and end covers1121 End feed unitsThey are equipped with a mechanical and electrical locating system (polarisation), making it possible to supply a run from the right or the left. They are supplied with an end cover.2 Central feed unitsThey are supplied with two end covers.TypeCanalis KNACanalis KNTClassic offer without busPENL3L2L1Control system with an internal digital bus+-PENL3L2L1DEBU020EN
Previous page: Kanalskena för kraftdistribution 40-160A, Canalis KN [19 / 68]
Next page: Kanalskena för kraftdistribution 40-160A, Canalis KN [21 / 68]
