8Representative offering only, visit www.panduit.com for complete listing of products.Applications• Run cable and hose along the frame rails• Secure a bundle under a chassis assembly• Manage wire harnesses in the cab and sleeper• Use a through-hole in frame/chassis to mount • Maintain a standoff from the frame rail in Chassis Tie applicationsSolutionPanduit Sta-Strap™ Classic Mount Ties are uniquely designed to secure a bundle directly to a chassis or panel utilizing a through holeFeatures• Eliminates the need for separate fasteners to reduce costs and decrease installation time• Remains adjustable and releasable until tie is tensioned and cut off• Installs easily with Panduit hand-operated tools• Engages clearance hole with optional centering pilot (2 designs) to prevent tie from shifting or abrading during vehicle operationChassis Mount TiesPart NumberLengthWidthThicknessHole Diameter RangeMax. Bundle Dia.Min. Loop Tensile Str.Recommended Installation ToolStd. Pkg. Qty.Std. Ctn. Qty.In.mmIn.mmIn.mmIn.mmIn.mmLbs.NWithout Centering PilotSSPM2.5H-L30010.12570.3007.60.0621.60.316 – 0.8208.0 – 21.02.7670120534GTH-E, GS4H-E, GS4EH-E, PTH, STH2, ST3EH502500SSPM4H-L30014.83760.3007.60.0621.60.316 – 0.8208.0 – 21.04.00102120534502500With Centering PilotSSPM2.5HP-L30010.12570.3007.60.0621.60.440 – 0.82011.2 – 21.02.7670120534GTH-E, GS4H-E, GS4EH-E, PTH, STH2, ST3EH502500SSPM4HP-L30014.83760.3007.60.0621.60.440 – 0.82011.2 – 21.04.00102120534502500With Long Centering PilotSSPM4HLP-TL30014.83760.3007.60.0621.60.440 – 0.82011.2 – 21.04.00102120534GTH-E, GS4H-E, GS4EH-E, PTH, STH2, ST3EH2502500Part Number (mm)Used with Cable TiesMaterialColorEnvironmentHammer-OnStd Pkg. QtyStd Ctn. QtyTMSTLHS6-M0M, I, S, HS, LHImpact modified weather resistant nylon 6.6BlackOutdoors or IndoorsHammer-on -1/4" stud dia. (6mm)1000–TMSTLHS8-M0Hammer-on -5/16" stud dia. (8mm)5000TMSTHS10-D0M, I, S, HS, LH, HHammer-on -3/8" stud dia. (10mm)500–TMSTHS11-D0Hammer-on -7/16" stud dia. (11mm)TMSTHS12-D0Hammer-on -12mm stud dia.TMSTHS13-D0Hammer-on -1/2" stud dia. (13mm)TMSTHS16-D0Hammer-on -5/8" stud dia. (16mm)TMSTHS19-D0Hammer-on -3/4" stud dia. (19mm)Three Easy Steps123Insert tip end of Sta-Strap™ cable tie through the correct size pre-drilled hole in the panel or chassis.Wrap cable tie around the bundle and insert the tip end back through the hole and head of the cable tie.Pull tip and until Sta-Strap™ cable tie is snug on bundle. Tension and cut off excess portion with Panduit cable tie installation too.Features• Easily applied to bolts or studs with a light hammer blow or turing of the mount• Designed for use with cable ties to route and secure cable bundles, air, water, and hydraulic linesStud Mounts for Heavy Cross Section Cable Ties
Previous page: Heavy Duty Cable Management Solutions [7 / 17]
