17. SpecificationInput voltageUp to 250 V (single phase system) / up to 430 V (three phase system),Input Frequency50/60 Hz,Type 2 to Type 1 AdaptorType 1 AC charging mode 3, suitable to IEC 62196-2 type 1 or SAE J1772 with vehicle connector (Type 1, 5P single-phase)Type 2 Charging PlugType 2 AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (Type 2, 7P three-phase)PE Pre-Test Yes - ButtonPP Simulation NC, 13 A, 20 A, 32 A, 63 ACP States A, B, C, DCP Error “E” Ye sPE Error (Earth fault) Ye sMeasuring PortsMax. 250/430 V AC, CAT II 250 V, max. 10 A L1, L2, L3, N and PE Mains socket Max. 250 V AC, CAT II 250 V, max. 10 A,Note: Do not load mains socket simultaneously with measuring ports!CP Signal output PortsApprox. +/-12 V, CAT 0 (under normal condition)Measurement category CAT II 250 VAltitude above sea level.2000 m max.Dimensions (W × H × L) 109 mm x 227 mm x 63 mm (without connection cable and test cable)Weight Approx: 780 gCE directive Low Voltage Directive LVD 2014/35/EU Safety IEC/EN 61010-1:2010 IEC/EN 61010-2-030:2010Working temperature 0 °C to +40 °CStorage temperature -10 °C to +50 °CWorking humidity 10 % to 85% relative humidity w/o condensationFuse RatingCeramic 10 A/250 V (5 mm x 20 mm)Product manufactured in China18. MaintenanceDo not open the adapter case. It contains no user-serviceable parts. Repair or servicing should be performed only by qualified personnel.www.megger.comEVCA210 14Specification
Previous page: EVCA210 laddpunktsadapter för elfordon [13 / 16]
