Data storage (DLRO2X only)www.megger.comDLRO2 and DLRO2X243. Run the test and the results will automatically be saved to the previously selected Asset ID.4. When the results are saved in the Asset ID a pop up will appear with the Asset ID name.5. To view the results, turn the rotary switch to Data Storage mode, select the Asset ID and click the TICK button () until the desired results are on screen.5.4 Save test results to USB stick1. To save your test results to a USB stick you must first insert the USB stick into the USB socket. The USB stick must be formatted to FAT32. Refer to 11.7 Firmware update on page 44.2. The Disk icon will appear above soft key 1.3. Use the soft keys to select the Asset ID that you require to be copied to the USB stick and click soft key 1. 4. Use soft key 2 to select the Asset ID to copy to the USB stick, or click soft key 3 if you want ALL Assets to copy to USB.5. When the data has copied to the USB stick a message will appear. The USB stick can be removed to transfer the data to your PC.
