Safety Warningswww.megger.comDLRO2 and DLRO2X102. Safety WarningsThe safety instructions given in this document are indicative of safe practice and are not to be considered exhaustive. Additionally, they are not intended to replace local safety procedures in the region where the instrument is used. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. There are no user replaceable parts within the DLRO2.2.1 Warnings, Cautions and NotesThis user guide follows the internationally recognized definition of warnings, cautions and notes. These instructions must be adhered to at all times.2.1.1 WarningsWarnings alert the reader to hazardous situations where injury to personnel can occur. They are set in red type to make them stand out. They are placed before the item to which they relate and repeated at each applicable occasion.2.1.2 CautionsCautions alert the reader to situations where equipment damage may result if a process is not followed properly. They are set in bold type. They are placed before the item to which they relate and repeated at each applicable occasion.2.1.3 NotesNotes give additional important information that will help the reader. They are not used when a Warning or Caution is applicable. They are not safety related and may be placed either before or after the associated text as required.2.2 Safety warningsThese safety warnings must be read and understood before the instrument is used. Retain for future reference.WARNING : This instrument must be operated only by suitably trained and competent people. Protection provided by the instrument may be impaired if it is not used in a manner specified by the manufacturer. Local Health and Safety Legislation requires users of this equipment and their employers to carry out valid risk assessments of all electrical work to identify potential sources of electrical danger and risk of electrical injury such as inadvertent short circuits. Where the assessments show that the risk is significant the use of fused test leads may be appropriate. If battery power is lost during the test, then the user will no longer be warned that the load is being discharged. The user must check by independent means that the load is discharged before breaking connection. Disconnect all test leads and switch the instrument OFF before opening the battery cover. Covers must be in place before reconnecting the test leads. Ensure every cell in the battery compartment is of identical type. Never mix rechargeable and non-chargeable cells. This product is not intrinsically safe. Do not use it in an explosive atmosphere. Protection provided by the instrument may be impaired if it is not used in a manner specified by the manufacturer. The voltage warning function will operate only if the instrument is switched on and working correctly. In the absence of an indication do not assume that there are no hazardous voltages. The voltage indicator and current discharge features must be regarded as additional safety features and MUST not substitute the normal safe working practice which MUST be followed. The instrument must not be used if any part of it is damaged or if the terminal shutter is missing.
